Friday, 12 15th

Last update03:04:50 AM

Articles

QSFP+,40G QSFP+,56G QSFP+,QSFP+ AOC,QSFP+ SR4,QSFP+ LR4 Transceiver

 

qsfp-transceiverF-tone QSFP+ (Quad Small Form-factor Pluggable Plus) is a new Multi-Source Agreement (MSA) for high speed application, such as 40Gbps, which provide four channels of data in one pluggable interface. Each channel is capable of transferring data at 10Gbps and supports a total of 40Gbps.
The 40Gbps QSFP+ transceiver is well suited for Infiniband and 40GBASE-SR4  /  40GBASE-LR4 applications. It combines the higher density attractions of parallel modules with some of the key advantages normally associated with SFP+ based modules. It is intended for use short reach applications in switches, routers and data center equipment where it provides higher density and lower cost when compared with standard SFP+ modules.

QSFP-40G-SR4 Series    QSFP SR4 / QSFP+ SR4 It is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 8 or 12 fiber MTP  (MPO) connector.
        
QSFP-40G-LR4 Series    QSFP LR4 / QSFP+ LR4  It is designed to operate over singlemode fiber system using four 10Gbps CWDM channel in 1300 band. Which is based on two LC connectors for optical connectivity and supports 40Gbps data rate links of up to 10km.
      

Application

Feature

  • High-speed interconnects within and between switches, routers and transport equipment
  • Server-Server Clusters, Super-computing interconnections
  • Proprietary backplanes
  • Interconnects rack-to-rack, shelf-to-shelf, board-to-board, board-to-optical backplane
  • 40GBASE-LR4 Ethernet links
  • 10GBASE-SR applications
  • 40GBASE-SR4 applications
  • InfiniBand SDR, DDR and QDR applications
  • QSFP+ MSA, SFF-8436 compatible
  • Four independently addressable transmit and receive channels
  • Highly compact: savings of 60% on edge and board usage compared to four comparable SFP+ modules
  • Electrically hot-pluggable
  • XFP-like latch mechanism for ease-of-insertion
  • Digital Diagnostics Monitoring Interface. allows customer management and monitoring of key modules parameters, analogous to SFP+
  • Optical connectivity via industry standard MPO/MTP terminated fiber ribbon

QSFP-56G-SR4 Series    The F-tone Technologies QSFP-56G-SR4 is a Four-Channel, Pluggable, Parallel, Fiber-Optic
QSFP+ Transceiver for InfiniBand FDR/QDR/DDR/SDR,16G/10G/8G/4G/2G fiber channel , PCIe and SAS
Applications. This transceiver is a high performance module for short-range multi-lane data communication
and interconnect applications. It integrates four data lanes in each direction with 56 Gbps bandwidth. Each
lane can operate at 14.025 Gbps up to 100 m using OM3 fiber or 150 m using OM4 fiber. These modules are

Application

Feature

  • InfiniBand FDR
  • 16x Fibre Channel
  • PCI-e3.0
  • Proprietary High Speed Interconnections
  • SAS 3.0
  • Four-channel full-duplex transceiver modules            
  • Transmission data rate up to 14.025Gbit/s per channel   
  • 4 channels 850nm VCSEL array
  • 4 channels PIN photo detector array
  • Low power consumption <1.5W
  • Housing isolated from connector ground
  • Operating case temperature 0°C to +70°C
  • 3.3V power supply voltage
  • RoHS 6 compliant
  • Hot Pluggable QSFP form factor
  • Maximum link length of 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF
  • Single MPO connector receptacle
  • Built-in digital diagnostic function

Features


Contact us

  • Add: Building 1,High-tech science technology industrial
    park,Chengdu,China
  • Tel: 0086-28-85255257

About us

Robot

F-tone is specializing in developing and manufacturing optical transceivers and components which are wildly applied in Datacon, Telecom and CATV, and provides customers with top quality and cost effective products. SFP,SFP光模块...