Sunday, 09 25th

Last update03:04:50 AM

You are here: Home Optical Transceiver 10G SFP+ CWDM 10G SFP+ SFP-10G-CWDM-10KM,10Gbps CWDM SFP+ Optical Transceiver, 10km Reach

SFP-10G-CWDM-10KM,10Gbps CWDM SFP+ Optical Transceiver, 10km Reach

SFP-10G-CWDM-10KM,10Gbps CWDM SFP+ Optical Transceiver, 10km Reach
Features
  1.   Optical interface compliant to IEEE 802.3ae 10GBASE-LR
  2.   Electrical interface compliant to SFF-8431
  3.   Hot Pluggable
  4.   4-Wavelengths CWDM DFB transmitter from 
  5.  1270nm to 1330nm, PIN photo-detector
  6.   Low power consumption
  7.   Applicable for 10km SMF connection
  8.   All-metal housing for superior EMI performance
  9.   Advanced firmware allow customer system encryption information to be stored in transceiver
  10.   Cost effective SFP+ solution, enables higher port densities and greater bandwidth
  11.   Operating case temperature:
  • Standard : 0 to +70°C
  • Industrial : -40 to +85°C
Applications
  1.   10GBASE-LR at 10.3125Gbps
  2.   10GBASE-LW at 9.953Gbps
  3.   Other optical links
Product description
This CWDM DFB  10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km.  
The CWDM SFP+ LR module electrical interface is compliant to SFI electrical specifications.  The transmitter input and receiver output impedance is 100 Ohms differential.  Data lines are internally AC coupled.  The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI.  SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.

Ordering information

Part Number

Product Description

FTCS-CW1X-10

1270nm~1330nm, with step 20nm CWDM DFB, 10Gbps, 10km,   0ºC ~ +70ºC

FTCS-CW1X-10I

1270nm~1330nm, with step 20nm CWDM DFB, 10Gbps, 10km,   -40 to +85°C

 

Optical characteristics

The following optical characteristics are defined over the Recommended Operating Environment unless otherwise specified.

 

Unit

Values

Operating Reach

m

10K

Transmit

Center wavelength (range)

nm

1270 -1330

Side Mode Suppression Ratio (min)

dB

30

   Launched power

– maximum

dBm

+0.5

– minimum

dBm

              -8.2      Notes1

-   OMA

dBm

-5.2

-   OMA-TDP (min)

dBm

-6.2

Transmitter and dispersion penalty

dB

               0        Notes4

Average launch power of OFF transmitter (max)

dBm

-30

  Extinction ratio (min)

dB

             3.5     Notes2

RIN12 OMA (max)

dB/Hz

-128

Optical Return Loss Tolerance (min)

dB

12

Receiver

Center wavelength (range)

nm

1260-1355

Receive overload (max) in average power1

dBm

0.5

Receive sensitivity (min) in average power1

dBm

          -14.4    Notes3

Receiver sensitivity (max) in OMA (footnote 2)

dBm

          -12.6    Notes3

Receiver Reflectance (max)

dB

-12

Stressed receiver sensitivity (max) in OMA2 

dBm

-10.3

Vertical eye closure penalty (min)3

dB

2.2

Stressed eye jitter (min)2

UIp-p

0.7

Receive electrical 3dB upper cutoff frequency (max)

GHz

12.3

Receiver power (damage, Max)

dBm

1.5

Notes:

  1. 1.The optical power is launched into SMF
  2. 2.Measured with a PRBS 231-1 test pattern@10.3125Gbps
  3. 3.Measured with a PRBS 231-1 test pattern@10.3125Gbps BER≤10-12
  4. 4.In G.652 and G.655(NDSF)

 

Contact us

  • Add: Building 1,High-tech science technology industrial
    park,Chengdu,China
  • Tel: 0086-28-85255257

About us

Robot

F-tone is specializing in developing and manufacturing optical transceivers and components which are wildly applied in Datacon, Telecom and CATV, and provides customers with top quality and cost effective products. SFP,SFP光模块...

You are here: Home Optical Transceiver 10G SFP+ CWDM 10G SFP+ SFP-10G-CWDM-10KM,10Gbps CWDM SFP+ Optical Transceiver, 10km Reach