Wednesday, 02 19th

Last update03:04:50 AM

You are here: Home Optical Transceiver 10G SFP+ 8G SFP+ module Displaying items by tag: 10G EPON ONU
Monday, 29 October 2012 17:06

10G EPON ONU SFP Transceiver

10G EPON ONU SFP Transceiver


  1.      Single fiber Bi-Directional transceiver with single mode SC receptacle
  2.      1310nm burst-mode 1.25Gbps transmitter with DFB laser
  3.      1577nm continuous-mode 10.3125Gbps receiver with APD-TIA
  4.      Complies with IEEE P802.3™D3.2 10/1GBASE–PRX30
  5.      Digital diagnostic interface compliant with SFF-8472 Rev 9.4 ,
  6.      Digital Diagnostic Monitoring (DDM) with external calibration
  7.      3.3V Single power supply
  8.      LVPECL interface logic level for data input
  9.     CML interface logic level for data output
  10.     Differential line input/output impedance 100 ohm
  11.     LVTTL for burst signal input and LOS detect output
  12.     Complies with RoHS directive (2002/95/EC)
  13.     Operating case temperature:
  •               Standard : 0 to +70°C
  •               Industrial : -40 to +85°C

     Asymmetric 10G/1G Ethernet Passive Optical Network ONT
The FTCS-10GONE-20X Bi-Directional Transceiver is the high performance module for single fiber communications by using 1310nm 1.25Gbps burst mode transmitter and 1577nm 10.3125Gbps continuous receiver. It is Optical Network Unit (ONU) for IEEE802.3av. The optical transceiver is compliant with the Small Form- Factor Pluggable (SFP) Multi-Source Agreement (MSA).
The transmitter section uses a 1310nm DFB laser diode with automatic power control (APC) function and temperature compensation circuitry to ensure stable extinction ratio over all operating temperature range, and full IEC825 and CDRH class 1 eye safety. The receiver has a hermetically packaged APD-TIA (trans-impedance amplifier) pre-amplifier and a limiting amplifier with CML compatible differential outputs.
The receiver section also provides LVTTL Loss of signal output (LOS). As the input optical power is decreased, LOS output switches from low to high (signal loss point). As the input optical power is increased from very low levels, LOS output will switch back from high to low (signal detection point). The level of signal detection point is at least 0.5 dB higher than the level of signal loss point. LVTTL logic interface simplifies interface to external circuitry.

Ordering information

Part Number

Product Description


Tx1310nm, Rx1577nm, 1.25Gbps/10.3125Gbps, 10/1GBASE–PRX30, 0ºC ~ +70ºC with Digital Diagnostic Monitoring

Published in 10G EPON ONU

Contact us

  • Add: Building 1,High-tech science technology industrial
  • Tel: 0086-28-85255257

About us


F-tone is specializing in developing and manufacturing optical transceivers and components which are wildly applied in Datacon, Telecom and CATV, and provides customers with top quality and cost effective products. SFP,SFP光模块...

You are here: Home Optical Transceiver 10G SFP+ 8G SFP+ module Displaying items by tag: 10G EPON ONU