Saturday, 09 21st

Last update03:04:50 AM

You are here: Home Optical Transceiver 10G SFP+ 8G SFP+ module Displaying items by tag: 10G SFP Transceiver
Tuesday, 04 December 2012 15:36

10G CDR SFP++ 80km 1550nm Optical Transceiver

10G CDR SFP++ 80km 1550nm Optical Transceiver

Features

  •  Compliant with SFF-8431,SFF-8432 and IEE802.3ae/OC192/STM-64
  •  Cooled EML transmitter and APD receiver
  •  Dual CDR with 9.95-11.3Gb/s
  •  link length up to 80km
  •  Low Power Dissipation 1.5W Typical (Maximum:3W)
  •  -5ºC to 70ºC Operating Case Temperature
  •  Single 3.3V power supply
  •  Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
  •  RoHS6 compliant and lead free

Applications

  •  10G SONET
  •  10G Ethernet
  •  10G Fiber Channel (with/without FEC)

Description
F-tone Networks SFP+ZR 1550nm Transceiver is a “Limiting module”, designed for 10G SONET.
The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the
receiver section consists of a APD photodiode integrated with a TIA. All modules satisfy class I laser safety
requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in
SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature,
laser bias current, transmitted optical power, received optical power and transceiver supply voltage.

References
1. “Specifications for Enhanced Small Form Factor Pluggable Module SFP+”, SFF-8431, Rev 4.1, July 6,
2009.
2. “Improved Pluggable Formfactor”,SFF-8432, Rev 4.2,Apr 18,2007
3. IEEE802.3ae – 2002
4. “Diagnostic Monitoring Interface for Optical Transceivers” SFF-8472, Rev 10.3, Dec 1,2007


Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be
specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or
contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change
without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights
of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

 

Published in 10G CDR SFP
Tuesday, 04 December 2012 15:29

10G CDR SFP++ 40km 1550nm Optical Transceiver

SFP++,10G CDR SFP++ 40km 1550nm Optical Transceiver

Features

  •  Compliant with SFF-8431,SFF-8432 and IEE802.3ae/OC192/STM-64
  •  Cooled EML transmitter and PIN receiver
  •  Dual CDR with 9.95-11.3Gb/s
  •  link length up to 40km
  •  Low Power Dissipation 1.5W Typical (Maximum:3W)
  •  -5ºC to 70ºC Operating Case Temperature
  •  Single 3.3V power supply
  •  Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
  •  RoHS6 compliant and lead free

Applications

  •  10G SONET
  •  10G Ethernet
  •  10G Fiber Channel (with/without FEC)

Description

F-tone Networks SFP+ER 1550nm Transceiver is a “Limiting module”, designed for 10G SONET.
The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the
receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety
requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in
SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature,
laser bias current, transmitted optical power, received optical power and transceiver supply voltage.

References
1. “Specifications for Enhanced Small Form Factor Pluggable Module SFP+”, SFF-8431, Rev 4.1, July 6,
2009.
2. “Improved Pluggable Formfactor”,SFF-8432, Rev 4.2,Apr 18,2007
3. IEEE802.3ae – 2002
4. “Diagnostic Monitoring Interface for Optical Transceivers” SFF-8472, Rev 10.3, Dec 1,2007

Published in 10G CDR SFP
Tuesday, 04 December 2012 15:19

10G CDR SFP++ 10km SONET Optical Transceiver

SFP++,10G CDR SFP++ 10km SONET Optical Transceiver

Features

  •  Optical interface compliant to IEEE 802.3ae/OC192/STM-64
  •  Electrical interface compliant to SFF-8431
  •  Hot Pluggable
  •  1310nm DFB transmitter, PIN photo-detector
  •  Dual CDR with 9.95-11.3Gb/s
  •  Operating case temperature: 0 to 70 °C
  •  Low power consumption
  •  Applicable for 10km SMF connection
  •  All-metal housing for superior EMI performance
  •  Advanced firmware allow customer system encryption information to be stored in transceiver
  •  Cost effective SFP+ solution, enables higher port densities and greater bandwidth
  •  RoHS6 compliant (lead free)

Applications

  •  10G SONET
  •  10G Ethernet
  •  10G Fiber Channel (with/without FEC)

Product description

This 1310 nm DFB 10Gbps SFP+ SONET transceiver is designed to transmit and receive optical data over
single mode optical fiber for link length 10km.
The SFP+ 10km module electrical interface is compliant to SFI electrical specifications. The transmitter
input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The
module provides differential termination and reduce differential to common mode conversion for quality signal
termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about
150mmof standard FR4 with one connector

Published in 10G CDR SFP
Monday, 29 October 2012 17:21

10G GPON ONU SFP,XG-PON1 ONU Transceiver

10G GPON ONU SFP,XG-PON1 ONU Transceiver

Features

  1.      Single fiber Bi-Directional transceiver with single mode SC receptacle
  2.      1270nm burst-mode 2.5Gbps transmitter with DFB laser
  3.      1577nm continuous-mode 9.953Gbps receiver with APD-TIA
  4.      Complies with ITU-T G.987.2 Class N1
  5.      Digital diagnostic interface compliant with SFF-8472 Rev 9.4 ,
  6.      Digital Diagnostic Monitoring (DDM) with external calibration
  7.      3.3V Single power supply
  8.      LVPECL interface logic level for data input
  9.     CML interface logic level for data output
  10.     Differential line input/output impedance 100 ohm
  11.     LVTTL for burst signal input and LOS detect output
  12.     Complies with RoHS directive (2002/95/EC)
  13.     Operating case temperature:
  • Standard :  0 to +70°C

Applications
Asymmetric 10G/2.5G Gigabit Passive Optical Network ONT

Description
The FTCS-10GONG-20X Bi-Directional Transceiver is the high performance module for single fiber communications by using 1270nm 2.5Gbps burst mode transmitter and 1577nm 9.953Gbps continuous receiver. The optical transceiver is compliant with the Small Form- Factor Pluggable (SFP) Multi-Source Agreement (MSA).
The transmitter section uses a 1270nm DFB laser diode with automatic power control (APC) function and temperature compensation circuitry to ensure stable extinction ratio over all operating temperature range, and full IEC825 and CDRH class 1 eye safety. The receiver has a hermetically packaged APD-TIA (trans-impedance amplifier) pre-amplifier and a limiting amplifier with CML compatible differential outputs.
The receiver section also provides LVTTL Loss of signal output (LOS). As the input optical power is decreased, LOS output switches from low to high (signal loss point). As the input optical power is increased from very low levels, LOS output will switch back from high to low (signal detection point). The level of signal detection point is at least 0.5 dB higher than the level of signal loss point. LVTTL logic interface simplifies interface to external circuitry.

Ordering information

Part Number

Product Description

FTCS-10GONG-20X

Tx1270nm, Rx1577nm, 2.5Gbps/9.953Gbps, Class N1, 0ºC ~ +70ºC with Digital Diagnostic Monitoring

Published in 10G GPON ONU
Monday, 29 October 2012 17:06

10G EPON ONU SFP Transceiver

10G EPON ONU SFP Transceiver

Features

  1.      Single fiber Bi-Directional transceiver with single mode SC receptacle
  2.      1310nm burst-mode 1.25Gbps transmitter with DFB laser
  3.      1577nm continuous-mode 10.3125Gbps receiver with APD-TIA
  4.      Complies with IEEE P802.3™D3.2 10/1GBASE–PRX30
  5.      Digital diagnostic interface compliant with SFF-8472 Rev 9.4 ,
  6.      Digital Diagnostic Monitoring (DDM) with external calibration
  7.      3.3V Single power supply
  8.      LVPECL interface logic level for data input
  9.     CML interface logic level for data output
  10.     Differential line input/output impedance 100 ohm
  11.     LVTTL for burst signal input and LOS detect output
  12.     Complies with RoHS directive (2002/95/EC)
  13.     Operating case temperature:
  •               Standard : 0 to +70°C
  •               Industrial : -40 to +85°C

Applications
     Asymmetric 10G/1G Ethernet Passive Optical Network ONT
Description
The FTCS-10GONE-20X Bi-Directional Transceiver is the high performance module for single fiber communications by using 1310nm 1.25Gbps burst mode transmitter and 1577nm 10.3125Gbps continuous receiver. It is Optical Network Unit (ONU) for IEEE802.3av. The optical transceiver is compliant with the Small Form- Factor Pluggable (SFP) Multi-Source Agreement (MSA).
The transmitter section uses a 1310nm DFB laser diode with automatic power control (APC) function and temperature compensation circuitry to ensure stable extinction ratio over all operating temperature range, and full IEC825 and CDRH class 1 eye safety. The receiver has a hermetically packaged APD-TIA (trans-impedance amplifier) pre-amplifier and a limiting amplifier with CML compatible differential outputs.
The receiver section also provides LVTTL Loss of signal output (LOS). As the input optical power is decreased, LOS output switches from low to high (signal loss point). As the input optical power is increased from very low levels, LOS output will switch back from high to low (signal detection point). The level of signal detection point is at least 0.5 dB higher than the level of signal loss point. LVTTL logic interface simplifies interface to external circuitry.

Ordering information

Part Number

Product Description

FTCS-10GONE-20X

Tx1310nm, Rx1577nm, 1.25Gbps/10.3125Gbps, 10/1GBASE–PRX30, 0ºC ~ +70ºC with Digital Diagnostic Monitoring

Published in 10G EPON ONU

Contact us

  • Add: Building 1,High-tech science technology industrial
    park,Chengdu,China
  • Tel: 0086-28-85255257

About us

Robot

F-tone is specializing in developing and manufacturing optical transceivers and components which are wildly applied in Datacon, Telecom and CATV, and provides customers with top quality and cost effective products. SFP,SFP光模块...

You are here: Home Optical Transceiver 10G SFP+ 8G SFP+ module Displaying items by tag: 10G SFP Transceiver