Monday, 12 16th

Last update03:04:50 AM

You are here: Home Optical Transceiver 10G SFP+ 8G SFP+ module Displaying items by tag: 3G SDI SFP
Thursday, 04 October 2012 17:38

3G-SDI SFP Optical Transceiver Receiver

3Gbps Video SFP Optical Transceiver
 
Features
  1.   HD-SDI SFP Transceiver available
  2.   SD-SDI SFP Transceiver available
  3.   3G-SDI SFP Transceiver available
  4.   SMPTE 297-2006 Compatible.
  5.   Metal enclosure for Lower EMI
  6.   1310nm FP laser and PIN photodetector 
  7.   Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
  8.   Digital Diagnostic Monitoring:
  9.   Compatible with RoHS
  10.   +3.3V single power supply
  11.   Operating case temperature:
  • Standard :  0 to +70°C
  • Industrial : -40 to +85°C 
 
Applications
  SMPTE 297-2006 Compatible Electrical-to-Optical Interfaces.
  HDTV/SDTV Service Interfaces.

Ordering information

Part Number

Product Description

FTCS-3G-SDI-R02

 3Gbps, 2km,    0ºC ~ +70ºC

FTCS-3G-SDI-R02I

 3Gbps, 2km,   -40ºC ~ +85ºC

FTCS-3G-SDI-R02D

 3Gbps, 2km,    0ºC ~ +70ºC , With Digital Diagnostic Monitoring

FTCS-3G-SDI-R02DI

 3Gbps, 2km,   -40ºC ~ +85ºC, With Digital Diagnostic Monitoring

Pin Descriptions

Pin

Signal Name

Description

Plug Seq.

Notes

1

VEET

Transmitter Ground

1

 

2

NC

 

 

 

3

NC

 

 

 

4

MOD_DEF(2)

SDA Serial Data Signal

3

Note 1

5

MOD_DEF(1)

SCL Serial Clock Signal

3

Note 1

6

MOD_DEF(0)

TTL Low

3

Note1

7

Rate Select

Not Connected

3

 

8

LOS

Loss of Signal

3

Note 2

9

VEER

Receiver ground

1

 

10

VEER

Receiver ground

1

 

11

VEER

Receiver ground

1

 

12

RD-

Inv. Received Data Out

3

Note 3

13

RD+

Received Data Out

3

Note 3

14

VEER

Receiver ground

1

 

15

VCCR

Receiver Power Supply

2

 

16

VCCT

Transmitter Power Supply

2

 

17

VEET

Transmitter Ground

1

 

18

NC

 

 

 

19

NC

 

 

 

20

VEET

Transmitter Ground

1

 

Notes:

Plug Seq.: Pin engagement sequence during hot plugging.

1) Mod-Def 0,1,2. These are the module definition pins. They should be pulled up with a 4.7k~10kΩ resistor on the host board. The pull-up voltage shall be VccT or VccR.

Mod-Def 0 is grounded by the module to indicate that the module is present

Mod-Def 1 is the clock line of two wire serial interface for serial ID

Mod-Def 2 is the data line of two wire serial interface for serial ID

2) LOS is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor. Pull up voltage between 2.0V and Vcc+0.3V. Logic 1 indicates loss of signal; Logic 0 indicates normal operation. In the low state, the output will be pulled to less than 0.8V.

3) RD-/+: These are the differential receiver outputs. They are internally AC-coupled 100 differential lines which should be terminated with 100Ω (differential) at the user SERDES.

 

Published in Video SFP
Thursday, 04 October 2012 17:18

3G-SDI SFP Optical Transceiver Transmitter

3Gbps Video SFP Optical Transceiver
 
Features
  1.   HD-SDI SFP Transceiver available
  2.   SD-SDI SFP Transceiver available
  3.   3G-SDI SFP Transceiver available
  4.   SMPTE 297-2006 Compatible.
  5.   Metal enclosure for Lower EMI
  6.   1310nm FP laser and PIN photodetector 
  7.   Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
  8.   Digital Diagnostic Monitoring:
  9.   Compatible with RoHS
  10.   +3.3V single power supply
  11.   Operating case temperature:
  • Standard :  0 to +70°C
  • Industrial : -40 to +85°C 
 
Applications
  SMPTE 297-2006 Compatible Electrical-to-Optical Interfaces.
  HDTV/SDTV Service Interfaces.

Ordering information

Part Number

Product Description

FTCS-3G-SDI-T02

1310nm, 3Gbps, 2km,    0ºC ~ +70ºC

FTCS-3G-SDI-T02I

1310nm, 3Gbps, 2km,   -40ºC ~ +85ºC

FTCS-3G-SDI-T02D

1310nm, 3Gbps, 2km,    0ºC ~ +70ºC , With Digital Diagnostic Monitoring

FTCS-3G-SDI-T02DI

1310nm, 3Gbps, 2km,   -40ºC ~ +85ºC, With Digital Diagnostic Monitoring

Pin Descriptions

Pin

Signal Name

Description

Plug Seq.

Notes

1

VEET

Transmitter Ground

1

 

2

TX FAULT

Transmitter Fault Indication

3

Note 1

3

TX DISABLE

Transmitter Disable

3

Note 2

4

MOD_DEF(2)

SDA Serial Data Signal

3

Note 3

5

MOD_DEF(1)

SCL Serial Clock Signal

3

Note 3

6

MOD_DEF(0)

TTL Low

3

Note 3

7

Rate Select

Not Connected

3

 

8

NC

 

 

 

9

VEER

Receiver ground

1

 

10

VEER

Receiver ground

1

 

11

VEER

Receiver ground

1

 

12

NC

 

 

 

13

NC

 

 

 

14

VEER

Receiver ground

1

 

15

VCCR

Receiver Power Supply

2

 

16

VCCT

Transmitter Power Supply

2

 

17

VEET

Transmitter Ground

1

 

18

TD+

Transmit Data In

3

Note 4

19

TD-

Inv. Transmit Data In

3

Note 4

20

VEET

Transmitter Ground

1

 

Notes:

Plug Seq.: Pin engagement sequence during hot plugging.

1) TX Fault is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the host board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; Logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.

2) TX Disable is an input that is used to shut down the transmitter optical output. It is pulled up within the module with a 4.7k~10kΩ resistor. Its states are:

Low (0 to 0.8V):             Transmitter on

(>0.8V, < 2.0V):             Undefined

High (2.0 to 3.465V):         Transmitter Disabled

Open:                      Transmitter Disabled

3) Mod-Def 0,1,2. These are the module definition pins. They should be pulled up with a 4.7k~10kΩ resistor on the host board. The pull-up voltage shall be VccT or VccR.

Mod-Def 0 is grounded by the module to indicate that the module is present

Mod-Def 1 is the clock line of two wire serial interface for serial ID

Mod-Def 2 is the data line of two wire serial interface for serial ID

4) TD-/+: These are the differential transmitter inputs. They are internally AC-coupled, differential lines with 100Ω differential termination inside the module.

 

Published in Video SFP
3Gbps CWDM Video SFP Optical Transceiver, 40km Reach
 
Features
  1.   HD-SDI SFP Transceiver available
  2.   SD-SDI SFP Transceiver available
  3.   3G-SDI SFP Transceiver available
  4.   SMPTE 297-2006 Compatible.
  5.   Metal enclosure for Lower EMI
  6.   Data-rate of 3Gbps operation
  7.   18 CWDM DFB wavelengths laser and PIN photodetector for 40km transmission
  8.   Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
  9.   Digital Diagnostic Monitoring:Internal Calibration or External Calibration
  10.   Compatible with RoHS
  11.   +3.3V single power supply
  12.   Operating case temperature:
  • Standard :  0 to +70°C
  • Industrial : -40 to +85°C
 
Applications
  1.   SMPTE 297-2006 Compatible Electrical-to-Optical Interfaces.
  2. HDTV/SDTV Service Interfaces
 
Description
The SFP transceivers are high performance, cost effective modules supporting dual data-rate of  3Gbps and 40km transmission distance with SMF.
 
The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
 
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
 

FTCS-3G-SDI-XX40

See table3 below for “xx” values

Table3 -λC Wavelength Guide

λC Wavelength Guide

Code

λC

Unit

Code

λC

Unit

Code

λC

Unit

Code

λC

Unit

27

1270

nm

37

1370

nm

47

1470

nm

57

1570

nm

29

1290

nm

39

1390

nm

49

1490

nm

59

1590

nm

31

1310

nm

41

1410

nm

51

1510

nm

61

1610

nm

33

1330

nm

43

1430

nm

53

1530

nm

 

 

 

35

1350

nm

45

1450

nm

55

1550

nm

 

 

 

 

Ordering information

Part Number

Product Description

FTCS-3G-SDI-XX40

CWDM, 3Gbps, 40km,   0ºC ~ +70ºC

FTCS-3G-SDI-XX40D

CWDM, 3Gbps, 40km,   0ºC ~ +70ºC,  With Digital Diagnostic Monitoring

FTCS-3G-SDI-XX40I CWDM, 3Gbps, 40km,   -40ºC ~ +85ºC

FTCS-3G-SDI-XX40DI

CWDM, 3Gbps, 40km,   -40ºC ~ +85ºC,  With Digital Diagnostic Monitoring

Published in Video SFP
3Gbps Video SFP Optical Transceiver, 40km Reach
 
Features
  1.   HD-SDI SFP Transceiver available
  2.   SD-SDI SFP Transceiver available
  3.   3G-SDI SFP Transceiver available
  4.   SMPTE 297-2006 Compatible.
  5.   Metal enclosure for Lower EMI
  6.   1550nm DFB laser and PIN photodetector 
  7.   Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
  8.   Digital Diagnostic Monitoring:
  9.   Compatible with RoHS
  10.   +3.3V single power supply
  11.   Operating case temperature:
  • Standard :  0 to +70°C
  • Industrial : -40 to +85°C
 
Applications
  1.   SMPTE 297-2006 Compatible Electrical-to-Optical Interfaces.
  2.   HDTV/SDTV Service Interfaces
 
Description
The SFP transceivers are high performance, cost effective modules supporting dual data-rate of  3Gbps and 40km transmission distance with SMF.
 
The transceiver consists of three sections: a DFB laser transmitter, a PIN  photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
 
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.

Ordering information

Part Number

Product Description

FTCS-3G-SDI-40

1550nm, 3Gbps, 40km,   0ºC ~ +70ºC

FTCS-3G-SDI-40D

1550nm, 3Gbps, 40km,   0ºC ~ +70ºC,  With Digital Diagnostic Monitoring

FTCS-3G-SDI-40I

1550nm, 3Gbps, 40km,   -40ºC ~ +85ºC,

FTCS-3G-SDI-40DI

1550nm, 3Gbps, 40km,   -40ºC ~ +85ºC,  With Digital Diagnostic Monitoring

Published in Video SFP
3Gbps Video SFP Optical Transceiver, 20km Reach
 
Features
  1.   HD-SDI SFP Transceiver available
  2.   SD-SDI SFP Transceiver available
  3.   3G-SDI SFP Transceiver available
  4.   SMPTE 297-2006 Compatible.
  5.   Metal enclosure for Lower EMI
  6.   1310nm DFB laser and PIN photodetector 
  7.   Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
  8.   Digital Diagnostic Monitoring:
  9.   Compatible with RoHS
  10.   +3.3V single power supply
  11.   Operating case temperature:
  • Standard :  0 to +70°C
  • Industrial : -40 to +85°C
 
Applications
  1.   SMPTE 297-2006 Compatible Electrical-to-Optical Interfaces.
  2.   HDTV/SDTV Service Interfaces.
 
Description
The SFP transceivers are high performance, cost effective modules supporting dual data-rate of  3Gbps and 20km transmission distance with SMF.
 
The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
 
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.

Ordering information

Part Number

Product Description

FTCS-3G-SDI-20

1310nm, 3Gbps, 20km,   0ºC ~ +70ºC

FTCS-3G-SDI-20D

1310nm, 3Gbps, 20km,   0ºC ~ +70ºC, With Digital Diagnostic Monitoring

FTCS-3G-SDI-20I

1310nm, 3Gbps, 20km,   -40ºC ~ +85ºC

FTCS-3G-SDI-20DI

1310nm, 3Gbps, 20km,   -40ºC ~ +85ºC ,With Digital Diagnostic Monitoring

Published in Video SFP
Thursday, 04 October 2012 16:07

3G-SDI SFP,3Gbps Video SFP Optical Transceiver

3Gbps Video SFP Optical Transceiver
 
Features
  1.   HD-SDI SFP Transceiver available
  2.   SD-SDI SFP Transceiver available
  3.   3G-SDI SFP Transceiver available
  4.   SMPTE 297-2006 Compatible.
  5.   Metal enclosure for Lower EMI
  6.   1310nm FP laser and PIN photodetector 
  7.   Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
  8.   Digital Diagnostic Monitoring:
  9.   Compatible with RoHS
  10.   +3.3V single power supply
  11.   Operating case temperature:
  • Standard :  0 to +70°C
  • Industrial : -40 to +85°C 
 
Applications
  SMPTE 297-2006 Compatible Electrical-to-Optical Interfaces.
  HDTV/SDTV Service Interfaces.

Ordering information

Part Number

Product Description

FTCS-3G-SDI-02

1310nm, 3Gbps, 2km,    0ºC ~ +70ºC

FTCS-3G-SDI-02I

1310nm, 3Gbps, 2km,   -40ºC ~ +85ºC

FTCS-3G-SDI-02D

1310nm, 3Gbps, 2km,    0ºC ~ +70ºC , With Digital Diagnostic Monitoring

FTCS-3G-SDI-02DI

1310nm, 3Gbps, 2km,   -40ºC ~ +85ºC, With Digital Diagnostic Monitoring

 

Published in Video SFP

Contact us

  • Add: Building 1,High-tech science technology industrial
    park,Chengdu,China
  • Tel: 0086-28-85255257

About us

Robot

F-tone is specializing in developing and manufacturing optical transceivers and components which are wildly applied in Datacon, Telecom and CATV, and provides customers with top quality and cost effective products. SFP,SFP光模块...

You are here: Home Optical Transceiver 10G SFP+ 8G SFP+ module Displaying items by tag: 3G SDI SFP