MiniSAS (SFF-8088) to CX4 (SFF-8470) Cable

Features

MiniSAS (SFF-8088) to CX4 (SFF-8470) Cables use cutting edge technology to provide an excellent hybrid cable solution for CX4/InfiniBand and MiniSAS rated switches, network adapters, and storage arrays. These cables have a MiniSAS connector on one end and a CX4 Connector on the opposite end. Each CX4-MiniSAS copper cable permits auto-negotiation between the two connected devices for optimal network throughput. Compatible with 4x Infiniband SDR/DDR and 10 GbE applications.

Specifications:
● Length = 0~5 Meter
● Wire Size (AWG) = 28
● Connector A = CX4 (SFF-8470)
● Connector B = MiniSAS (SFF-8088)
● Conductor: Copper
● High performance 8 pair wire construction
● Low cross-talk and pair-to-pair skew
● Supports 10-Gigabit Ethernet
● Supports 10GBASE-CX4 and SDR/DDR InfiniBand
● RoHS Compliant.
● 5-Year Warranty

Applications

● CX4/InfiniBand and MiniSAS rated switches
● Network adapters
● Storage arrays

MiniSAS (SFF-8088) to 4x SFP Cable,MiniSAS (SFF-8088) to 4x SFP Cable Manufacturer

MiniSAS (SFF-8088) Cable Series
MiniSAS (SFF-8088) is a computer bus used to move data to and from computer storage devices such as hard drives and tape drives. SAS depends on a point-to-point serial protocol that replaces the parallel SCSI bus technology that first appeared in the mid 1980s in data centers and workstations, and it uses the standard SCSI command set. The T10 technical committee of the International Committee for Information Technology Standards (INCITS) develops and maintains the SAS protocol; the SCSI Trade Association (SCSITA) promotes the technology.

F-tone Networks offers cost-effective MiniSAS (SFF-8088) series cables.

Features

MiniSAS (SFF-8088) (10G) to 4x SFP (2.5G) Splitter Cable assemblies -- high-performance, cost-effective cabling interconnect solution for merging 10G MiniSAS (SFF-8088) and 2.5G SFP enabled host adapters, switches and servers.

For typical applications, users can install this splitter cable between an available MiniSAS (SFF-8088) port on their 10-Gigabit/s rated switch and feed up to four upstream 2.5GbE-SFP enabled switches.

Each MiniSAS (SFF-8088) (10G) to 4x SFP (2.5G) splitter cable features a single MiniSAS (SFF-8088) connector rated for 10-Gb/s on one end and (4) SFP connectors, each rated for 2.5-Gb/s, on the other.

Product Features:
● MiniSAS (SFF-8088) (10G) to 4x SFP (2.5G) Splitter Cable -0~ 5m
  Connector A: (1) MiniSAS 10.0 Gb/s Rated Connector
  Connector B: (4) SFP 2.5 Gb/s Rated Connectors
● AWG30
● 5-Year Warranty
● RoHS Compliant

Applications

● 10G MiniSAS (SFF-8088) and 2.5G SFP enabled host adapters, switches and servers

MiniSAS (SFF-8088) Cable,MiniSAS (SFF-8088) Cable Manufacturer

MiniSAS (SFF-8088) is a computer bus used to move data to and from computer storage devices such as hard drives and tape drives. SAS depends on a point-to-point serial protocol that replaces the parallel SCSI bus technology that first appeared in the mid 1980s in data centers and workstations, and it uses the standard SCSI command set. The T10 technical committee of the International Committee for Information Technology Standards (INCITS) develops and maintains the SAS protocol; the SCSI Trade Association (SCSITA) promotes the technology.

F-tone Networks offers cost-effective MiniSAS (SFF-8088) series cables.

If you need customized services, please contact This email address is being protected from spambots. You need JavaScript enabled to view it. for more details.

Features

Mini-Serial Attached SCSI (Mini-SAS) (SFF-8088) cable assemblies -- high-performance, cost-effective cabling solutions for high-speed serial buses supporting 4X SAS architectures. The copper cables are designed to be fully compliant with 3Gb/s SAS and 6Gb/s SAS protocols.

Specifications:

● Length = 0~12 Meters
● AWG28
● Connector A = SFF-8088 (Universal Key)
● Connector B = SFF-8088 (Universal Key)
● Impedance = 100 Ohms
● 8 pair wire construction
● Exceeds SAS 1.1 and SAS 2 Specification
● 5-Year Warranty
● RoHS Compliant

Applications

● Storage Area Networks( SAN)
● Network Attached Storage
● Storage Servers

QSFP+ to MiniSAS SFF-8088 Cable,QSFP+ to MiniSAS SFF-8088 Cable Manufacturer

Features

QSFP+ (Quad Small Form-factor Pluggable) to MIniSAS (SFF-8088) hybrid cables are designed for high-density Serial Attached SCSI (SAS) applications. These cables are used as an interconnect solution between newer QSFP+ Hardware and older external 3G and 6G Mini SAS equipment and provide data transfer rates up to 10Gbops per channel at distances of up to 10 Meterss. These cables are compliant to QSFP+ Multi-Source Agreement.

Specifications:

● Length =0~7 Meters
● AWG=24
● Connector 1 = QSFP+ (SFF-8436)
● Connector 2 = MIniSAS (SFF-8088)
● Impedance = 100 Ohms
● High performance 8 pair wire construction
● QSFP+ MSA Complaint
● ROHS Compliant
● 5-Year Warranty

Applications

SAS/Mini-SAS