Saturday, 09 21st

Last update03:04:50 AM

You are here: Home Optical Transceiver 10G SFP+ 8G SFP+ module Displaying items by tag: OLT SFP
Sunday, 28 October 2012 15:22

GPON OLT SFP Class C+ Transceiver

GPON SFP OLT Class C+ Transceiver
Features

  1.      Single Fiber Transceiver with single mode SC receptacle
  2.      1490nm continuous-mode transmitter with DFB laser
  3.      1310nm burst-mode receiver with APD-TIA
  4.      Single 3.3V power supply
  5.      Reset burst-mode receiver design
  6.      Burst mode signal detect output which is LVTTL compatible.
  7.      Burst mode received signal strength indication (RSSI) output
  8.      Complies with ITU-T G984.2 Class C+
  9.      Digital diagnostic interface compliant with SFF-8472 Rev 9.4 ,
  10.      Complies with RoHS directive (2002/95/EC)
  11.      Operating case temperature:     
  •   Standard : 0 to +70°C
  •   Industrial : -40 to +85°C

Applications
 Gigabit Passive Optical Networks (G-PON) – OLT side
Description
The FTCS-OLG-20CX transceiver is the high performance module for single fiber by using 1490nm continuous-mode transmitter and 1310nm burst-mode receiver. It is optical line terminal(OLT) for ITU-T G984.2. The optical transceiver is compliant with the Small Form- Factor Pluggable (SFP) Multi-Source Agreement (MSA).
 The transmitter section uses a 1490nm DFB LD with automatic power control (APC) function and temperature compensation circuitry to ensure stable extinction ratio over all operating temperature range. and is ClassⅠlaser compliant IEC825 and CDRH standards.The receiver has a hermetically packaged burst-mode APD-TIA  (trans-impedance amplifier) pre-amplifier and a burst-mode limiting amplifier with LVPECL compatible differential outputs.
  The receiver also includes the function of burst mode signal detect output and fast RSSI output which is enabled by a trigger. When the burst optical power is on, the receiver outputs high level; when the burst optical power is off, the receiver outputs low level. Fast RSSI function can satisfy more severe timing demand to monitor the power from any ONU.

Ordering information

Part Number

Product Description

FTCS-OLG-20C

Tx1490nm, Rx1310nm , 2.5Gbps/1.25Gbps, Class C+, 0ºC ~ +70ºC With Digital Diagnostic Monitoring

FTCS-OLG-20CI

Tx1490nm, Rx1310nm , 2.5Gbps/1.25Gbps, Class C+-40 to +85°C With Digital Diagnostic Monitoring

 

Published in GPON OLT
Sunday, 28 October 2012 15:14

GPON OLT SFP,GPON OLT SFP Transceiver

GPON OLT SFP,GPON OLT SFP Transceiver
Features

  1.      Single Fiber Transceiver with single mode SC receptacle
  2.      1490nm continuous-mode transmitter with DFB laser
  3.      1310nm burst-mode receiver with APD-TIA
  4.      Single 3.3V power supply
  5.      Reset burst-mode receiver design
  6.      Burst mode signal detect output which is LVTTL compatible.
  7.      Burst mode received signal strength indication (RSSI) output
  8.      20Km Reach 28dB link budget
  9.      Complies with ITU-T G984.2 Class B+
  10.      Digital diagnostic interface compliant with SFF-8472 Rev 9.4 ,
  11.      Complies with RoHS directive (2002/95/EC)
  12.      Operating case temperature:
  •           Standard : 0 to +70°C
  •           Industrial : -40 to +85°C

Applications
 Gigabit Passive Optical Networks (G-PON) – OLT side

Description
The FTCS-OLG-20X transceiver is the high performance module for single fiber by using 1490nm continuous-mode transmitter and 1310nm burst-mode receiver. It is optical line terminal(OLT) for ITU-T G984.2. The optical transceiver is compliant with the Small Form- Factor Pluggable (SFP) Multi-Source Agreement (MSA).
 The transmitter section uses a 1490nm DFB LD with automatic power control (APC) function and temperature compensation circuitry to ensure stable extinction ratio over all operating temperature range. and is ClassⅠlaser compliant IEC825 and CDRH standards.The receiver has a hermetically packaged burst-mode APD-TIA  (trans-impedance amplifier) pre-amplifier and a burst-mode limiting amplifier with LVPECL compatible differential outputs.
  The receiver also includes the function of burst mode signal detect output and fast RSSI output which is enabled by a trigger. When the burst optical power is on, the receiver outputs high level; when the burst optical power is off, the receiver outputs low level. Fast RSSI function can satisfy more severe timing demand to monitor the power from any ONU.

Ordering information

Part Number

Product Description

FTCS-OLG-20B

Tx1490nm, Rx1310nm , 2.5Gbps/1.25Gbps, Class B+, 0ºC ~ +70ºC With Digital Diagnostic Monitoring

FTCS-OLG-20BI

Tx1490nm, Rx1310nm , 2.5Gbps/1.25Gbps, Class B+, -40 to +85°C With Digital Diagnostic Monitoring

 

Published in GPON OLT
Thursday, 25 October 2012 15:21

GEPON OLT SFP,GEPON OLT SFP Transceiver

GEPON OLT SFP,GEPON OLT SFP Transceiver

Features

  1.      Single Fiber Transceiver with single mode SC receptacle
  2.      1490nm continuous-mode 1.25G/s transmitter with DFB laser
  3.      1310nm burst-mode 1.25G/s receiver with APD-TIA
  4.      Single 3.3V power supply
  5.      LVPECL compatible data input /output
  6.      Support more than 24dB dynamic range
  7.      Continued mode received signal strength indication (RSSI) output
  8.      Complies with IEEE Std 802.3ah™ -2004 1000BASE-PX20
  9.      Digital diagnostic interface compliant with SFF-8472 Rev 9.4 ,
  10.      Complies with RoHS directive (2002/95/EC)
  11.      Operating case temperature:
  •       Standard : 0 to +70°C
  •       Industrial : -40 to +85°C


Applications
Gigabit Ethernet Passive Optical Network (GEPON) OLT
Description
The FTCS-OLE-20X transceiver is the high performance module for single fiber by using 1490nm continuous-mode transmitter and 1310nm burst-mode receiver. It is optical line terminal(OLT) for IEEE Std 802.3ah™ -2004 1000BASE-PX20. The optical transceiver is compliant with the Small Form- Factor Pluggable  (SFP) Multi-Source Agreement (MSA).
The transmitter section uses a 1490nm DFB LD with automatic power control (APC) function and temperature compensation circuitry to ensure stable extinction ratio over all operating temperature range. and is ClassⅠlaser compliant IEC825 and CDRH standards.The receiver has a hermetically packaged APD-TIA  (trans-impedance amplifier) pre-amplifier and a limiting amplifier with LVPECL compatible differential outputs.

Ordering information

Part Number

Product Description

FTCS-OLE-20B

Tx1490nm, Rx1310nm ,1.25Gbps/1.25Gbps, 1000BASE-PX20, 0ºC ~ +70ºC With Digital Diagnostic Monitoring

FTCS-OLE-20BI

Tx1490nm, Rx1310nm ,1.25Gbps/1.25Gbps, 1000BASE-PX20, -40ºC ~ +85ºC With Digital Diagnostic Monitoring

Published in GEPON OLT

Contact us

  • Add: Building 1,High-tech science technology industrial
    park,Chengdu,China
  • Tel: 0086-28-85255257

About us

Robot

F-tone is specializing in developing and manufacturing optical transceivers and components which are wildly applied in Datacon, Telecom and CATV, and provides customers with top quality and cost effective products. SFP,SFP光模块...

You are here: Home Optical Transceiver 10G SFP+ 8G SFP+ module Displaying items by tag: OLT SFP