Sunday, 09 25th

Last update03:04:50 AM

You are here: Home Optical Transceiver 10G SFP+ 8G SFP+ module Displaying items by tag: QSFP 40G
Saturday, 27 April 2013 16:32

QSFP-40G-AOC Active Optical Cable

QSFP-40G-AOC Active Optical Cable

Features

    Compliant to InfiniBand, 10Gbps QDR, 5Gbps DDR, 2.5 Gbps SDR
    Aggregate bandwidth of > 40Gbps
    MTP/MPO optical connector
    QSFP+ MSA compliant
    Capable of over 100m  transmission on high bandwidth 50um multi-mode ribbon fiber   
    Single +3.3V p ower supply
    Operating case temperature: 0~70C
    RoHS compliant  


Applications

    Rack to rack
    Data centers  
    Metro networks
    Switches and Routers
    Infiniband 4x SDR, DDR, QDR  
    10G Ethernet

General Description  
The QSFP-AOC-AXX   is a  parallel  40 Gbps  Quad Small Form-factor Pluggable ( QSFP+)
active optical cable  that provides increased port density and total system cost savings .
The QSFP+  full -duplex optical module  offers 4 independent transmit and receive
channels, each capable of 10Gbps operation for an aggregate bandwidth of 40Gbps
over 100 meters of multi -mode fiber.
 
An optical fiber ribbon cable with an MPO/MTP connector at each end plugs into
the  QSFP+  module receptacle. The orientation of the ribbon cable is “keyed” and
guide pin s are present inside the module ’s receptacle to ensure proper alignment.
The cable usually has no twist (key up to key up) to ensure proper channel to   channel
alignment. Electrical connection is achieved though a z- pluggable 38-pin IPASS connector.  
 
The module operate s   from a single +3.3V power supply and LVCMOS/LVTTL global
control signals such as Module Present, Reset, Interrupt and Low Power Mode a re
available with the modules. A 2-wire serial interface is available to send and receive
more complex control signals and to obtain digital diagnostic information. Individual
channels can be addressed and unused channels can be shut down for maximum
design flexibility.   
The QSFP-AOC-AXX is designed with form factor, optical/electrical connection and
digital diagnostic  interface according to the  QSFP+  Multi-Source Agreement (MSA).  It  
has   been designed to meet the harshest external operating conditions incl uding
temperature,  humidity and EMI interference.   The module offer s   very high
functionality and feature integration, accessible via a two-wire serial interface.

Published in QSFP+ 40G
Saturday, 27 April 2013 16:29

QSFP-40G-LR4 Transceiver

Features

  •     Compliant with 40G Ethernet IEEE802.3ba and 40GBASE-LR4 Standard
  •     QSFP+ MSA compliant
  •     Compliant with QDR/DDR InfiniBand data rates
  •     Up to 11.2Gbps data rate per wavelength
  •     4 CWDM lanes MUX/DEMUX design  
  •     Up to 10km  transmission
  •     Operating case temperature: 0~70C
  •     Maximum 3.5W operation power
  •     RoHS compliant

Applications

  •     40G BASE-LR4 Ethernet Links
  •     InfiniBand QDR and DDR interconnects
  •     Client-side 40G Telecom connections

     This  product is a  transceiver  module designed for 2m-10km optical  communication
applications. The design is compliant to 40GBASE-LR4 of the IEEE P802.3ba standard.
The  module converts  4  inputs  channels (ch) of  10Gb/s  electrical  data  to  4  CWDM
optical  signals,  and  multiplexes  them  into  a  single  channel  for  40Gb/s  optical
transmission. Reversely, on  the  receiver  side,  the  module optically de-multiplexes  a
40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output
electrical data.
    The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm
as  members  of  the  CWDM  wavelength  grid  defined  in  ITU-T  G694.2. It contains  a
duplex  LC  connector  for  the  optical  interface  and  a  148-pin  connector  for  the
electrical interface. To minimize the optical dispersion in the long-haul system, single-
mode fiber (SMF) has to be applied in this module.
    The product is  designed with  form  factor,  optical/electrical  connection  and digital
diagnostic interface  according  to  the  QSFP Multi-Source  Agreement  (MSA). It has
been  designed  to  meet  the  harshest  external  operating  conditions  including
temperature, humidity and EMI interference.

Published in QSFP+ 40G
Saturday, 27 April 2013 16:23

QSFP-40G-IR4 Transceiver

Features

  •     4 independent full-duplex channels
  •     Up to 11.2Gbps data rate per channel  
  •     MTP/MPO optical connector
  •     QSFP+ MSA compliant
  •     Digital diagnostic capabilities
  •     40GBASE-IR4, up to 2KM Fiber Link
  •     CML compatible electrical I/O
  •     Single +3.3V power supply
  •     Operating case temperature: 0~70C
  •     XLPPI  electric interface (with 1.5W Max power)
  •     RoHS-6 compliant

Applications

  •     Rack to rack
  •     Data Center  
  •     Infiniband QDR, DDR and SDR
  •     40G Ethernet
Published in QSFP+ 40G
Saturday, 27 April 2013 16:14

QSFP-40G-SR4 Transceiver

Features

  •     4 independent full-duplex channels
  •     Up to 11.2Gbps data rate per channel  
  •     MTP/MPO optical connector
  •     QSFP+ MSA compliant
  •     Digital diagnostic capabilities
  •     Capable of over 100m  transmission on OM3 multi-mode ribbon fiber  
  •     CML compatible electrical I/O
  •     Single +3.3V power supply
  •     Operating case temperature: 0~70C
  •     XLPPI  electric interface (with 1.5W Max power)
  •     RoHS-6 compliant

Applications

  •     Rack to rack
  •     Data Center  
  •     Infiniband QDR, DDR and SDR
  •     40G Ethernet

The QSFP-SR4 is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP+)
optical module. It provides increased port density and total system cost savings. The
QSFP+ full-duplex optical module offers 4 independent transmit and receive channels,
each  capable  of  10Gbps  operation  for  an  aggregate data  rate of  40Gbps  over  100
meters of OM3 multi-mode fiber.
An optical fiber ribbon cable with an MPO/MTP connector can be plugged into the
QSFP+ module receptacle. Proper alignment is ensured by the guide pins inside the
receptacle.  The  cable  usually  can’t  be  twisted  for  proper  channel  to  channel
alignment.  Electrical  connection  is  achieved  though  a  z-pluggable  38-pin  IPASS connector.  
The module operates by a single +3.3V power supply. LVCMOS/LVTTL global control
signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available
with  the  modules.  A  2-wire  serial  interface  is  available  to  send  and  receive  more
complex  control  signals,  and  to receive  digital  diagnostic  information.  Individual
channels  can  be  addressed  and  unused  channels  can  be  shut  down  for  maximum
design flexibility.   
The  QSFP-SR4  is  designed with  form  factor,  optical/electrical  connection  and
digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It
has been  designed  to  meet  the  harshest  external  operating  conditions  including
temperature,  humidity  and  EMI  interference.  The  module  offers  very  high
functionality and feature integration, accessible via a two-wire serial interface.

Published in QSFP+ 40G

Contact us

  • Add: Building 1,High-tech science technology industrial
    park,Chengdu,China
  • Tel: 0086-28-85255257

About us

Robot

F-tone is specializing in developing and manufacturing optical transceivers and components which are wildly applied in Datacon, Telecom and CATV, and provides customers with top quality and cost effective products. SFP,SFP光模块...

You are here: Home Optical Transceiver 10G SFP+ 8G SFP+ module Displaying items by tag: QSFP 40G